org.scalatest

WordSpec

trait WordSpec extends Suite with ShouldVerb with MustVerb with CanVerb

Trait that facilitates a “behavior-driven” style of development (BDD), in which tests are combined with text that specifies the behavior the tests verify. (In BDD, the word example is usually used instead of test. The word test will not appear in your code if you use WordSpec, so if you prefer the word example you can use it. However, in this documentation the word test will be used, for clarity and to be consistent with the rest of ScalaTest.) Trait WordSpec is so named because you specification text is structured by placing words after strings. Here's an example WordSpec:

import org.scalatest.WordSpec
import scala.collection.mutable.Stack

class StackSpec extends WordSpec {

"A Stack" should {

"pop values in last-in-first-out order" in { val stack = new Stack[Int] stack.push(1) stack.push(2) assert(stack.pop() === 2) assert(stack.pop() === 1) }

"throw NoSuchElementException if an empty stack is popped" in { val emptyStack = new Stack[String] intercept[NoSuchElementException] { emptyStack.pop() } } } }

Note: Trait WordSpec is in part inspired by class org.specs.Specification, designed by Eric Torreborre for the Specs framework.

In a WordSpec you write a one (or more) sentence specification for each bit of behavior you wish to specify and test. Each specification sentence has a "subject," which is sometimes called the system under test (or SUT). The subject is entity being specified and tested and also serves as the subject of the sentences you write for each test. A subject can be followed by one of three verbs, should, must, or can, and a block. Here are some examples:

"A Stack" should {
  // ...
}
"An Account" must {
  // ...
}
"A ShippingManifest" can {
  // ...
}

You can describe a subject in varying situations by using a when clause. A when clause follows the subject and precedes a block. In the block after the when, you place strings that describe a situation or a state the subject may be in using a string, each followed by a verb. Here's an example:

"A Stack" when {
  "empty" should {
    // ...
  }
  "non-empty" should {
    // ...
  }
  "full" should {
    // ...
  }
}

When you are ready to finish a sentence, you write a string followed by in and a block that contains the code of the test. Here's an example:

import org.scalatest.WordSpec

class StackSpec extends WordSpec { "A Stack" when { "empty" should { "be empty" in { // ... } "complain on peek" in { // ... } "complain on pop" in { // ... } } "full" should { "be full" in { // ... } "complain on push" in { // ... } } } }

Running the above StackSpec in the interpreter would yield:

scala> (new StackSpec).execute()
A Stack (when empty)
- should be empty
- should complain on peek
- should complain on pop
A Stack (when full)
- should be full
- should complain on push

Note that the output does not exactly match the input in an effort to maximize readability. Although the WordSpec code is nested, which can help you eliminate any repeated phrases in the specification portion of your code, the output printed will have one line per subject per situation, and one line per test.

Sometimes you may wish to eliminate repeated phrases inside the block following a verb. Here's an example in which the phrase "provide an and/or operator that" is repeated:

import org.scalatest.WordSpec

class AndOrSpec extends WordSpec {

"The ScalaTest Matchers DSL" should { "provide an and operator that returns silently when evaluating true and true" in {} "provide an and operator that throws a TestFailedException when evaluating true and false" in {} "provide an and operator that throws a TestFailedException when evaluating false and true" in {} "provide an and operator that throws a TestFailedException when evaluating false and false" in {} "provide an or operator that returns silently when evaluating true or true" in {} "provide an or operator that returns silently when evaluating true or false" in {} "provide an or operator that returns silently when evaluating false or true" in {} "provide an or operator that throws a TestFailedException when evaluating false or false" in {} } }

In such situations you can place that clauses inside the verb clause, like this:

import org.scalatest.WordSpec

class AndOrSpec extends WordSpec {

"The ScalaTest Matchers DSL" should { "provide an and operator" that { "returns silently when evaluating true and true" in {} "throws a TestFailedException when evaluating true and false" in {} "that throws a TestFailedException when evaluating false and true" in {} "throws a TestFailedException when evaluating false and false" in {} } "provide an or operator" that { "returns silently when evaluating true or true" in {} "returns silently when evaluating true or false" in {} "returns silently when evaluating false or true" in {} "throws a TestFailedException when evaluating false or false" in {} } } }

If a word or phrase is repeated at the beginning of each string contained in a block, you can eliminate that repetition by using an after word. An after word is a word or phrase that you can place after when, a verb, or that. For example, in the previous WordSpec, the word "provide" is repeated at the beginning of each string inside the should block. You can factor out this duplication like this:

import org.scalatest.WordSpec

class AndOrSpec extends WordSpec {

def provide = afterWord("provide")

"The ScalaTest Matchers DSL" should provide { "an and operator" that { "returns silently when evaluating true and true" in {} "throws a TestFailedException when evaluating true and false" in {} "that throws a TestFailedException when evaluating false and true" in {} "throws a TestFailedException when evaluating false and false" in {} } "an or operator" that { "returns silently when evaluating true or true" in {} "returns silently when evaluating true or false" in {} "returns silently when evaluating false or true" in {} "throws a TestFailedException when evaluating false or false" in {} } } }

Once you've defined an after word, you can place it after when, a verb (should, must, or can), or that. (You can't place one after in or is, the words that introduce a test.) Here's an example that has after words used in all three places:

import org.scalatest.WordSpec

class ScalaTestGUISpec extends WordSpec {

def theUser = afterWord("the user") def display = afterWord("display") def is = afterWord("is")

"The ScalaTest GUI" when theUser { "clicks on an event report in the list box" should display { "a blue background in the clicked-on row in the list box" in {} "the details for the event in the details area" in {} "a rerun button" that is { "enabled if the clicked-on event is rerunnable" in {} "disabled if the clicked-on event is not rerunnable" in {} } } } }

Running the previous WordSpec in the Scala interpreter would yield:

scala> (new ScalaTestGUISpec).execute()
The ScalaTest GUI (when the user clicks on an event report in the list box)
- should display a blue background in the clicked-on row in the list box
- should display the details for the event in the details area
- should display a rerun button that is enabled if the clicked-on event is rerunnable
- should display a rerun button that is disabled if the clicked-on event is not rerunnable

A WordSpec's lifecycle has two phases: the registration phase and the ready phase. It starts in registration phase and enters ready phase the first time run is called on it. It then remains in ready phase for the remainder of its lifetime.

Tests can only be registered while the WordSpec is in its registration phase. Any attempt to register a test after the WordSpec has entered its ready phase, i.e., after run has been invoked on the WordSpec, will be met with a thrown TestRegistrationClosedException. The recommended style of using WordSpec is to register tests during object construction as is done in all the examples shown here. If you keep to the recommended style, you should never see a TestRegistrationClosedException.

Shared fixtures

A test fixture is objects or other artifacts (such as files, sockets, database connections, etc.) used by tests to do their work. You can use fixtures in WordSpecs with the same approaches suggested for Suite in its documentation. The same text that appears in the test fixture section of Suite's documentation is repeated here, with examples changed from Suite to WordSpec.

If a fixture is used by only one test, then the definitions of the fixture objects can be local to the test function, such as the objects assigned to stack and emptyStack in the previous StackSpec examples. If multiple tests need to share an immutable fixture, one approach is to assign them to instance variables. Here's a (very contrived) example, in which the object assigned to shared is used by multiple test functions:

import org.scalatest.WordSpec

class ArithmeticSpec extends WordSpec {

// Sharing immutable fixture objects via instance variables val shared = 5

"The Scala language" should { "add correctly" in { val sum = 2 + 3 assert(sum === shared) }

"subtract correctly" in { val diff = 7 - 2 assert(diff === shared) } } }

In some cases, however, shared mutable fixture objects may be changed by tests such that they need to be recreated or reinitialized before each test. Shared resources such as files or database connections may also need to be created and initialized before, and cleaned up after, each test. JUnit offers methods setUp and tearDown for this purpose. In ScalaTest, you can use the BeforeAndAfterEach trait, which will be described later, to implement an approach similar to JUnit's setUp and tearDown, however, this approach often involves reassigning vars between tests. Before going that route, you should consider some approaches that avoid vars. One approach is to write one or more create-fixture methods that return a new instance of a needed object (or a tuple or case class holding new instances of multiple objects) each time it is called. You can then call a create-fixture method at the beginning of each test that needs the fixture, storing the fixture object or objects in local variables. Here's an example:

import org.scalatest.WordSpec
import scala.collection.mutable.ListBuffer

class MySuite extends WordSpec {

// create objects needed by tests and return as a tuple def createFixture = ( new StringBuilder("ScalaTest is "), new ListBuffer[String] )

"ScalaTest" should {

"be easy " in { val (builder, lbuf) = createFixture builder.append("easy!") assert(builder.toString === "ScalaTest is easy!") assert(lbuf.isEmpty) lbuf += "sweet" }

"be fun" in { val (builder, lbuf) = createFixture builder.append("fun!") assert(builder.toString === "ScalaTest is fun!") assert(lbuf.isEmpty) } } }

If different tests in the same WordSpec require different fixtures, you can create multiple create-fixture methods and call the method (or methods) needed by each test at the begining of the test. If every test requires the same set of mutable fixture objects, one other approach you can take is make them simply vals and mix in trait OneInstancePerTest. If you mix in OneInstancePerTest, each test will be run in its own instance of the WordSpec, similar to the way JUnit tests are executed.

Although the create-fixture and OneInstancePerTest approaches take care of setting up a fixture before each test, they don't address the problem of cleaning up a fixture after the test completes. In this situation, one option is to mix in the BeforeAndAfterEach trait. BeforeAndAfterEach's beforeEach method will be run before, and its afterEach method after, each test (like JUnit's setUp and tearDown methods, respectively). For example, you could create a temporary file before each test, and delete it afterwords, like this:

import org.scalatest.WordSpec
import org.scalatest.BeforeAndAfterEach
import java.io.FileReader
import java.io.FileWriter
import java.io.File

class MySuite extends WordSpec with BeforeAndAfterEach {

private val FileName = "TempFile.txt" private var reader: FileReader = _

// Set up the temp file needed by the test override def beforeEach() { val writer = new FileWriter(FileName) try { writer.write("Hello, test!") } finally { writer.close() }

// Create the reader needed by the test reader = new FileReader(FileName) }

// Close and delete the temp file override def afterEach() { reader.close() val file = new File(FileName) file.delete() }

"A FileReader" must { "read in the contents of a file correctly" in { var builder = new StringBuilder var c = reader.read() while (c != -1) { builder.append(c.toChar) c = reader.read() } assert(builder.toString === "Hello, test!") }

"read in the first character of a file correctly" in { assert(reader.read() === 'H') }

"not be required" in { assert(1 + 1 === 2) } } }

In this example, the instance variable reader is a var, so it can be reinitialized between tests by the beforeEach method.

Although the BeforeAndAfterEach approach should be familiar to the users of most test other frameworks, ScalaTest provides another alternative that also allows you to perform cleanup after each test: overriding withFixture(NoArgTest). To execute each test, Suite's implementation of the runTest method wraps an invocation of the appropriate test method in a no-arg function. runTest passes that test function to the withFixture(NoArgTest) method, which is responsible for actually running the test by invoking the function. Suite's implementation of withFixture(NoArgTest) simply invokes the function, like this:

// Default implementation
protected def withFixture(test: NoArgTest) {
  test()
}

The withFixture(NoArgTest) method exists so that you can override it and set a fixture up before, and clean it up after, each test. Thus, the previous temp file example could also be implemented without mixing in BeforeAndAfterEach, like this:

import org.scalatest.WordSpec
import org.scalatest.BeforeAndAfterEach
import java.io.FileReader
import java.io.FileWriter
import java.io.File

class MySuite extends WordSpec {

private var reader: FileReader = _

override def withFixture(test: NoArgTest) {

val FileName = "TempFile.txt"

// Set up the temp file needed by the test val writer = new FileWriter(FileName) try { writer.write("Hello, test!") } finally { writer.close() }

// Create the reader needed by the test reader = new FileReader(FileName)

try { test() // Invoke the test function } finally { // Close and delete the temp file reader.close() val file = new File(FileName) file.delete() } }

"A FileReader" must { "read in the contents of a file correctly" in { var builder = new StringBuilder var c = reader.read() while (c != -1) { builder.append(c.toChar) c = reader.read() } assert(builder.toString === "Hello, test!") }

"read in the first character of a file correctly" in { assert(reader.read() === 'H') }

"not be required" in { assert(1 + 1 === 2) } } }

If you prefer to keep your test classes immutable, one final variation is to use the FixtureWordSpec trait from the org.scalatest.fixture package. Tests in an org.scalatest.fixture.FixtureWordSpec can have a fixture object passed in as a parameter. You must indicate the type of the fixture object by defining the Fixture type member and define a withFixture method that takes a one-arg test function. (A FixtureWordSpec has two overloaded withFixture methods, therefore, one that takes a OneArgTest and the other, inherited from Suite, that takes a NoArgTest.) Inside the withFixture(OneArgTest) method, you create the fixture, pass it into the test function, then perform any necessary cleanup after the test function returns. Instead of invoking each test directly, a FixtureWordSpec will pass a function that invokes the code of a test to withFixture(OneArgTest). Your withFixture(OneArgTest) method, therefore, is responsible for actually running the code of the test by invoking the test function. For example, you could pass the temp file reader fixture to each test that needs it by overriding the withFixture(OneArgTest) method of a FixtureWordSpec, like this:

import org.scalatest.fixture.FixtureWordSpec
import java.io.FileReader
import java.io.FileWriter
import java.io.File

class MySuite extends FixtureWordSpec {

type FixtureParam = FileReader

def withFixture(test: OneArgTest) {

val FileName = "TempFile.txt"

// Set up the temp file needed by the test val writer = new FileWriter(FileName) try { writer.write("Hello, test!") } finally { writer.close() }

// Create the reader needed by the test val reader = new FileReader(FileName)

try { // Run the test using the temp file test(reader) } finally { // Close and delete the temp file reader.close() val file = new File(FileName) file.delete() } }

"A FileReader" must { "read in the contents of a file correctly" in { reader => var builder = new StringBuilder var c = reader.read() while (c != -1) { builder.append(c.toChar) c = reader.read() } assert(builder.toString === "Hello, test!") }

"read in the first character of a file correctly" in { reader => assert(reader.read() === 'H') }

"not be required" in { () => assert(1 + 1 === 2) } } }

It is worth noting that the only difference in the test code between the mutable BeforeAndAfterEach approach shown here and the immutable FixtureWordSpec approach shown previously is that two of the FixtureWordSpec's test functions take a FileReader as a parameter via the "reader =>" at the beginning of the function. Otherwise the test code is identical. One benefit of the explicit parameter is that, as demonstrated by the "A FileReader must not be required" test, a FixtureWordSpec test need not take the fixture. So you can have some tests that take a fixture, and others that don't. In this case, the FixtureWordSpec provides documentation indicating which tests use the fixture and which don't, whereas the BeforeAndAfterEach approach does not. (If you have want to combine tests that take different fixture types in the same WordSpec, you can use MultipleFixtureWordSpec.)

If you want to execute code before and after all tests (and nested suites) in a suite, such as you could do with @BeforeClass and @AfterClass annotations in JUnit 4, you can use the beforeAll and afterAll methods of BeforeAndAfterAll. See the documentation for BeforeAndAfterAll for an example.

Shared tests

Sometimes you may want to run the same test code on different fixture objects. In other words, you may want to write tests that are "shared" by different fixture objects. To accomplish this in a WordSpec, you first place shared tests in behavior functions. These behavior functions will be invoked during the construction phase of any WordSpec that uses them, so that the tests they contain will be registered as tests in that WordSpec. For example, given this stack class:

import scala.collection.mutable.ListBuffer

class Stack[T] {

val MAX = 10 private var buf = new ListBuffer[T]

def push(o: T) { if (!full) o +: buf else throw new IllegalStateException("can't push onto a full stack") }

def pop(): T = { if (!empty) buf.remove(0) else throw new IllegalStateException("can't pop an empty stack") }

def peek: T = { if (!empty) buf(0) else throw new IllegalStateException("can't pop an empty stack") }

def full: Boolean = buf.size == MAX def empty: Boolean = buf.size == 0 def size = buf.size

override def toString = buf.mkString("Stack(", ", ", ")") }

You may want to test the Stack class in different states: empty, full, with one item, with one item less than capacity, etc. You may find you have several tests that make sense any time the stack is non-empty. Thus you'd ideally want to run those same tests for three stack fixture objects: a full stack, a stack with a one item, and a stack with one item less than capacity. With shared tests, you can factor these tests out into a behavior function, into which you pass the stack fixture to use when running the tests. So in your WordSpec for stack, you'd invoke the behavior function three times, passing in each of the three stack fixtures so that the shared tests are run for all three fixtures. You can define a behavior function that encapsulates these shared tests inside the WordSpec that uses them. If they are shared between different WordSpecs, however, you could also define them in a separate trait that is mixed into each WordSpec that uses them.

For example, here the nonEmptyStack behavior function (in this case, a behavior method) is defined in a trait along with another method containing shared tests for non-full stacks:

trait StackBehaviors { this: WordSpec =>

def nonEmptyStack(stack: Stack[Int], lastItemAdded: Int) {

"be non-empty" in { assert(!stack.empty) }

"return the top item on peek" in { assert(stack.peek === lastItemAdded) }

"not remove the top item on peek" in { val size = stack.size assert(stack.peek === lastItemAdded) assert(stack.size === size) }

"remove the top item on pop" in { val size = stack.size assert(stack.pop === lastItemAdded) assert(stack.size === size - 1) } }

def nonFullStack(stack: Stack[Int]) {

"not be full" in { assert(!stack.full) }

"add to the top on push" in { val size = stack.size stack.push(7) assert(stack.size === size + 1) assert(stack.peek === 7) } } }

Given these behavior functions, you could invoke them directly, but WordSpec offers a DSL for the purpose, which looks like this:

behave like nonEmptyStack(stackWithOneItem, lastValuePushed)
behave like nonFullStack(stackWithOneItem)

If you prefer to use an imperative style to change fixtures, for example by mixing in BeforeAndAfterEach and reassigning a stack var in beforeEach, you could write your behavior functions in the context of that var, which means you wouldn't need to pass in the stack fixture because it would be in scope already inside the behavior function. In that case, your code would look like this:

behave like nonEmptyStack // assuming lastValuePushed is also in scope inside nonEmptyStack
behave like nonFullStack

The recommended style, however, is the functional, pass-all-the-needed-values-in style. Here's an example:

class SharedTestExampleSpec extends WordSpec with StackBehaviors {

// Stack fixture creation methods def emptyStack = new Stack[Int]

def fullStack = { val stack = new Stack[Int] for (i <- 0 until stack.MAX) stack.push(i) stack }

def stackWithOneItem = { val stack = new Stack[Int] stack.push(9) stack }

def stackWithOneItemLessThanCapacity = { val stack = new Stack[Int] for (i <- 1 to 9) stack.push(i) stack }

val lastValuePushed = 9

"A Stack" when { "empty" should { "be empty" in { assert(emptyStack.empty) }

"complain on peek" in { intercept[IllegalStateException] { emptyStack.peek } }

"complain on pop" in { intercept[IllegalStateException] { emptyStack.pop } } }

"it contains one item" should { behave like nonEmptyStack(stackWithOneItem, lastValuePushed) behave like nonFullStack(stackWithOneItem) }

"it contains one item less than capacity" should { behave like nonEmptyStack(stackWithOneItemLessThanCapacity, lastValuePushed) behave like nonFullStack(stackWithOneItemLessThanCapacity) }

"full" should { "be full" in { assert(fullStack.full) }

behave like nonEmptyStack(fullStack, lastValuePushed)

"complain on a push" in { intercept[IllegalStateException] { fullStack.push(10) } } } } }

If you load these classes into the Scala interpreter (with scalatest's JAR file on the class path), and execute it, you'll see:

scala> (new SharedTestExampleSpec).execute()
A Stack (when empty)
- should be empty
- should complain on peek
- should complain on pop
A Stack (when it contains one item)
- should be non-empty
- should return the top item on peek
- should not remove the top item on peek
- should remove the top item on pop
- should not be full
- should add to the top on push
A Stack (when it contains one item less than capacity)
- should be non-empty
- should return the top item on peek
- should not remove the top item on peek
- should remove the top item on pop
- should not be full
- should add to the top on push
A Stack (when full)
- should be full
- should be non-empty
- should return the top item on peek
- should not remove the top item on peek
- should remove the top item on pop
- should complain on a push

One thing to keep in mind when using shared tests is that in ScalaTest, each test in a suite must have a unique name. If you register the same tests repeatedly in the same suite, one problem you may encounter is an exception at runtime complaining that multiple tests are being registered with the same test name. A good way to solve this problem in a FlatSpec is to make sure each invocation of a behavior function is in the context of a different behavior of clause, which will prepend a string to each test name. For example, the following code in a FlatSpec would register a test with the name "A Stack (when empty) should be empty":

  behavior of "A Stack (when empty)"

it should "be empty" in { assert(emptyStack.empty) } // ...

Or, using the shorthand notation:

  "A Stack (when empty)" should "be empty" in {
    assert(emptyStack.empty)
  }
  // ...

If the "should be empty" test was factored out into a behavior function, it could be called repeatedly so long as each invocation of the behavior function is in the context of a different behavior of clause.

Tagging tests

A WordSpec's tests may be classified into groups by tagging them with string names. As with any suite, when executing a WordSpec, groups of tests can optionally be included and/or excluded. To tag a WordSpec's tests, you pass objects that extend abstract class org.scalatest.Tag to taggedAs method invoked on the string that describes the test you want to tag. Class Tag takes one parameter, a string name. If you have created Java annotation interfaces for use as group names in direct subclasses of org.scalatest.Suite, then you will probably want to use group names on your WordSpecs that match. To do so, simply pass the fully qualified names of the Java interfaces to the Tag constructor. For example, if you've defined Java annotation interfaces with fully qualified names, com.mycompany.groups.SlowTest and com.mycompany.groups.DbTest, then you could create matching groups for Specs like this:

import org.scalatest.Tag

object SlowTest extends Tag("com.mycompany.groups.SlowTest") object DbTest extends Tag("com.mycompany.groups.DbTest")

Given these definitions, you could place WordSpec tests into groups like this:

import org.scalatest.WordSpec

class MySuite extends WordSpec {

"The Scala language" should {

"add correctly" taggedAs(SlowTest) in { val sum = 1 + 1 assert(sum === 2) assert(sum + 2 === 4) }

"subtract correctly" taggedAs(SlowTest, DbTest) in { val diff = 4 - 1 assert(diff === 3) assert(diff - 2 === 1) } } }

This code marks both tests with the com.mycompany.groups.SlowTest tag, and test "The Scala language should subtract correctly" with the com.mycompany.groups.DbTest tag.

The primary run method takes a Filter, whose constructor takes an optional Set[String]s called tagsToInclude and a Set[String] called tagsToExclude. If tagsToInclude is None, all tests will be run except those those belonging to tags listed in the tagsToExclude Set. If tagsToInclude is defined, only tests belonging to tags mentioned in the tagsToInclude set, and not mentioned in tagsToExclude, will be run.

Ignored tests

To support the common use case of “temporarily” disabling a test, with the good intention of resurrecting the test at a later time, WordSpec adds a method ignore to strings that can be used instead of in to register a test. For example, to temporarily disable the test with the name "A Stack should pop values in last-in-first-out order", just change “in” into “ignore,” like this:

import org.scalatest.WordSpec
import scala.collection.mutable.Stack

class StackSpec extends WordSpec {

"A Stack" should {

"pop values in last-in-first-out order" ignore { val stack = new Stack[Int] stack.push(1) stack.push(2) assert(stack.pop() === 2) assert(stack.pop() === 1) }

"throw NoSuchElementException if an empty stack is popped" in { val emptyStack = new Stack[String] intercept[NoSuchElementException] { emptyStack.pop() } } } }

If you run this version of StackSpec with:

scala> (new StackSpec).execute()

It will run only the second test and report that the first test was ignored:

A Stack
- should pop values in last-in-first-out order !!! IGNORED !!!
- should throw NoSuchElementException if an empty stack is popped

Informers

One of the parameters to the primary run method is a Reporter, which will collect and report information about the running suite of tests. Information about suites and tests that were run, whether tests succeeded or failed, and tests that were ignored will be passed to the Reporter as the suite runs. Most often the reporting done by default by WordSpec's methods will be sufficient, but occasionally you may wish to provide custom information to the Reporter from a test. For this purpose, an Informer that will forward information to the current Reporter is provided via the info parameterless method. You can pass the extra information to the Informer via its apply method. The Informer will then pass the information to the Reporter via an InfoProvided event. Here's an example:

import org.scalatest.WordSpec

class ArithmeticSpec extends WordSpec {

"The Scala language" should { "add correctly" in { val sum = 2 + 3 assert(sum === 5) info("addition seems to work") }

"subtract correctly" in { val diff = 7 - 2 assert(diff === 5) } } }

If you run this WordSpec from the interpreter, you will see the following message included in the printed report:

scala> (new ArithmeticSpec).execute()
The Scala language
- should add correctly
  + addition seems to work
- should subtract correctly

One use case for the Informer is to pass more information about a specification to the reporter. For example, the GivenWhenThen trait provides methods that use the implicit info provided by WordSpec to pass such information to the reporter. Here's an example:

import org.scalatest.WordSpec
import org.scalatest.GivenWhenThen

class ArithmeticSpec extends WordSpec with GivenWhenThen {

"The Scala language" should {

"add correctly" in {

given("two integers") val x = 2 val y = 3

when("they are added") val sum = x + y

then("the result is the sum of the two numbers") assert(sum === 5) }

"subtract correctly" in {

given("two integers") val x = 7 val y = 2

when("one is subtracted from the other") val diff = x - y

then("the result is the difference of the two numbers") assert(diff === 5) } } }

If you run this WordSpec from the interpreter, you will see the following messages included in the printed report:

scala> (new ArithmeticSpec).execute()
The Scala language
- should add correctly
  + Given two integers
  + When they are added
  + Then the result is the sum of the two numbers
- should subtract correctly
  + Given two integers
  + When one is subtracted from the other
  + Then the result is the difference of the two numbers

Pending tests

A pending test is one that has been given a name but is not yet implemented. The purpose of pending tests is to facilitate a style of testing in which documentation of behavior is sketched out before tests are written to verify that behavior (and often, the before the behavior of the system being tested is itself implemented). Such sketches form a kind of specification of what tests and functionality to implement later.

To support this style of testing, a test can be given a name that specifies one bit of behavior required by the system being tested. The test can also include some code that sends more information about the behavior to the reporter when the tests run. At the end of the test, it can call method pending, which will cause it to complete abruptly with TestPendingException. Because tests in ScalaTest can be designated as pending with TestPendingException, both the test name and any information sent to the reporter when running the test can appear in the report of a test run. (In other words, the code of a pending test is executed just like any other test.) However, because the test completes abruptly with TestPendingException, the test will be reported as pending, to indicate the actual test, and possibly the functionality it is intended to test, has not yet been implemented. You can mark tests as pending in a WordSpec like this:

import org.scalatest.WordSpec

class ArithmeticSpec extends WordSpec {

// Sharing fixture objects via instance variables val shared = 5

"The Scala language" should { "add correctly" in { val sum = 2 + 3 assert(sum === shared) }

"subtract correctly" is (pending) } }

If you run this version of ArithmeticSpec with:

scala> (new ArithmeticSpec).execute()

It will run both tests but report that The Scala language should subtract correctly is pending. You'll see:

The Scala language
- should add correctly
- should subtract correctly (pending)

One difference between an ignored test and a pending one is that an ignored test is intended to be used during a significant refactorings of the code under test, when tests break and you don't want to spend the time to fix all of them immediately. You can mark some of those broken tests as ignored temporarily, so that you can focus the red bar on just failing tests you actually want to fix immediately. Later you can go back and fix the ignored tests. In other words, by ignoring some failing tests temporarily, you can more easily notice failed tests that you actually want to fix. By contrast, a pending test is intended to be used before a test and/or the code under test is written. Pending indicates you've decided to write a test for a bit of behavior, but either you haven't written the test yet, or have only written part of it, or perhaps you've written the test but don't want to implement the behavior it tests until after you've implemented a different bit of behavior you realized you need first. Thus ignored tests are designed to facilitate refactoring of existing code whereas pending tests are designed to facilitate the creation of new code.

One other difference between ignored and pending tests is that ignored tests are implemented as a test tag that is excluded by default. Thus an ignored test is never executed. By contrast, a pending test is implemented as a test that throws TestPendingException (which is what calling the pending method does). Thus the body of pending tests are executed up until they throw TestPendingException. The reason for this difference is that it enables your unfinished test to send InfoProvided messages to the reporter before it completes abruptly with TestPendingException, as shown in the previous example on Informers that used the GivenWhenThen trait. For example, the following snippet in a WordSpec:

 "The Scala language" should {
    "add correctly" in {
      given("two integers")
      when("they are added")
      then("the result is the sum of the two numbers")
      pending
    }
    // ...

Would yield the following output when run in the interpreter:

The Scala language
- should add correctly (pending)
  + Given two integers
  + When they are added
  + Then the result is the sum of the two numbers

Trait that facilitates a “behavior-driven” style of development (BDD), in which tests are combined with text that specifies the behavior the tests verify. (In BDD, the word example is usually used instead of test. The word test will not appear in your code if you use WordSpec, so if you prefer the word example you can use it. However, in this documentation the word test will be used, for clarity and to be consistent with the rest of ScalaTest.) Trait WordSpec is so named because you specification text is structured by placing words after strings. Here's an example WordSpec:

import org.scalatest.WordSpec
import scala.collection.mutable.Stack

class StackSpec extends WordSpec {

"A Stack" should {

"pop values in last-in-first-out order" in { val stack = new Stack[Int] stack.push(1) stack.push(2) assert(stack.pop() === 2) assert(stack.pop() === 1) }

"throw NoSuchElementException if an empty stack is popped" in { val emptyStack = new Stack[String] intercept[NoSuchElementException] { emptyStack.pop() } } } }

Note: Trait WordSpec is in part inspired by class org.specs.Specification, designed by Eric Torreborre for the Specs framework.

In a WordSpec you write a one (or more) sentence specification for each bit of behavior you wish to specify and test. Each specification sentence has a "subject," which is sometimes called the system under test (or SUT). The subject is entity being specified and tested and also serves as the subject of the sentences you write for each test. A subject can be followed by one of three verbs, should, must, or can, and a block. Here are some examples:

"A Stack" should {
  // ...
}
"An Account" must {
  // ...
}
"A ShippingManifest" can {
  // ...
}

You can describe a subject in varying situations by using a when clause. A when clause follows the subject and precedes a block. In the block after the when, you place strings that describe a situation or a state the subject may be in using a string, each followed by a verb. Here's an example:

"A Stack" when {
  "empty" should {
    // ...
  }
  "non-empty" should {
    // ...
  }
  "full" should {
    // ...
  }
}

When you are ready to finish a sentence, you write a string followed by in and a block that contains the code of the test. Here's an example:

import org.scalatest.WordSpec

class StackSpec extends WordSpec { "A Stack" when { "empty" should { "be empty" in { // ... } "complain on peek" in { // ... } "complain on pop" in { // ... } } "full" should { "be full" in { // ... } "complain on push" in { // ... } } } }

Running the above StackSpec in the interpreter would yield:

scala> (new StackSpec).execute()
A Stack (when empty)
- should be empty
- should complain on peek
- should complain on pop
A Stack (when full)
- should be full
- should complain on push

Note that the output does not exactly match the input in an effort to maximize readability. Although the WordSpec code is nested, which can help you eliminate any repeated phrases in the specification portion of your code, the output printed will have one line per subject per situation, and one line per test.

Sometimes you may wish to eliminate repeated phrases inside the block following a verb. Here's an example in which the phrase "provide an and/or operator that" is repeated:

import org.scalatest.WordSpec

class AndOrSpec extends WordSpec {

"The ScalaTest Matchers DSL" should { "provide an and operator that returns silently when evaluating true and true" in {} "provide an and operator that throws a TestFailedException when evaluating true and false" in {} "provide an and operator that throws a TestFailedException when evaluating false and true" in {} "provide an and operator that throws a TestFailedException when evaluating false and false" in {} "provide an or operator that returns silently when evaluating true or true" in {} "provide an or operator that returns silently when evaluating true or false" in {} "provide an or operator that returns silently when evaluating false or true" in {} "provide an or operator that throws a TestFailedException when evaluating false or false" in {} } }

In such situations you can place that clauses inside the verb clause, like this:

import org.scalatest.WordSpec

class AndOrSpec extends WordSpec {

"The ScalaTest Matchers DSL" should { "provide an and operator" that { "returns silently when evaluating true and true" in {} "throws a TestFailedException when evaluating true and false" in {} "that throws a TestFailedException when evaluating false and true" in {} "throws a TestFailedException when evaluating false and false" in {} } "provide an or operator" that { "returns silently when evaluating true or true" in {} "returns silently when evaluating true or false" in {} "returns silently when evaluating false or true" in {} "throws a TestFailedException when evaluating false or false" in {} } } }

If a word or phrase is repeated at the beginning of each string contained in a block, you can eliminate that repetition by using an after word. An after word is a word or phrase that you can place after when, a verb, or that. For example, in the previous WordSpec, the word "provide" is repeated at the beginning of each string inside the should block. You can factor out this duplication like this:

import org.scalatest.WordSpec

class AndOrSpec extends WordSpec {

def provide = afterWord("provide")

"The ScalaTest Matchers DSL" should provide { "an and operator" that { "returns silently when evaluating true and true" in {} "throws a TestFailedException when evaluating true and false" in {} "that throws a TestFailedException when evaluating false and true" in {} "throws a TestFailedException when evaluating false and false" in {} } "an or operator" that { "returns silently when evaluating true or true" in {} "returns silently when evaluating true or false" in {} "returns silently when evaluating false or true" in {} "throws a TestFailedException when evaluating false or false" in {} } } }

Once you've defined an after word, you can place it after when, a verb (should, must, or can), or that. (You can't place one after in or is, the words that introduce a test.) Here's an example that has after words used in all three places:

import org.scalatest.WordSpec

class ScalaTestGUISpec extends WordSpec {

def theUser = afterWord("the user") def display = afterWord("display") def is = afterWord("is")

"The ScalaTest GUI" when theUser { "clicks on an event report in the list box" should display { "a blue background in the clicked-on row in the list box" in {} "the details for the event in the details area" in {} "a rerun button" that is { "enabled if the clicked-on event is rerunnable" in {} "disabled if the clicked-on event is not rerunnable" in {} } } } }

Running the previous WordSpec in the Scala interpreter would yield:

scala> (new ScalaTestGUISpec).execute()
The ScalaTest GUI (when the user clicks on an event report in the list box)
- should display a blue background in the clicked-on row in the list box
- should display the details for the event in the details area
- should display a rerun button that is enabled if the clicked-on event is rerunnable
- should display a rerun button that is disabled if the clicked-on event is not rerunnable

A WordSpec's lifecycle has two phases: the registration phase and the ready phase. It starts in registration phase and enters ready phase the first time run is called on it. It then remains in ready phase for the remainder of its lifetime.

Tests can only be registered while the WordSpec is in its registration phase. Any attempt to register a test after the WordSpec has entered its ready phase, i.e., after run has been invoked on the WordSpec, will be met with a thrown TestRegistrationClosedException. The recommended style of using WordSpec is to register tests during object construction as is done in all the examples shown here. If you keep to the recommended style, you should never see a TestRegistrationClosedException.

Shared fixtures

A test fixture is objects or other artifacts (such as files, sockets, database connections, etc.) used by tests to do their work. You can use fixtures in WordSpecs with the same approaches suggested for Suite in its documentation. The same text that appears in the test fixture section of Suite's documentation is repeated here, with examples changed from Suite to WordSpec.

If a fixture is used by only one test, then the definitions of the fixture objects can be local to the test function, such as the objects assigned to stack and emptyStack in the previous StackSpec examples. If multiple tests need to share an immutable fixture, one approach is to assign them to instance variables. Here's a (very contrived) example, in which the object assigned to shared is used by multiple test functions:

import org.scalatest.WordSpec

class ArithmeticSpec extends WordSpec {

// Sharing immutable fixture objects via instance variables val shared = 5

"The Scala language" should { "add correctly" in { val sum = 2 + 3 assert(sum === shared) }

"subtract correctly" in { val diff = 7 - 2 assert(diff === shared) } } }

In some cases, however, shared mutable fixture objects may be changed by tests such that they need to be recreated or reinitialized before each test. Shared resources such as files or database connections may also need to be created and initialized before, and cleaned up after, each test. JUnit offers methods setUp and tearDown for this purpose. In ScalaTest, you can use the BeforeAndAfterEach trait, which will be described later, to implement an approach similar to JUnit's setUp and tearDown, however, this approach often involves reassigning vars between tests. Before going that route, you should consider some approaches that avoid vars. One approach is to write one or more create-fixture methods that return a new instance of a needed object (or a tuple or case class holding new instances of multiple objects) each time it is called. You can then call a create-fixture method at the beginning of each test that needs the fixture, storing the fixture object or objects in local variables. Here's an example:

import org.scalatest.WordSpec
import scala.collection.mutable.ListBuffer

class MySuite extends WordSpec {

// create objects needed by tests and return as a tuple def createFixture = ( new StringBuilder("ScalaTest is "), new ListBuffer[String] )

"ScalaTest" should {

"be easy " in { val (builder, lbuf) = createFixture builder.append("easy!") assert(builder.toString === "ScalaTest is easy!") assert(lbuf.isEmpty) lbuf += "sweet" }

"be fun" in { val (builder, lbuf) = createFixture builder.append("fun!") assert(builder.toString === "ScalaTest is fun!") assert(lbuf.isEmpty) } } }

If different tests in the same WordSpec require different fixtures, you can create multiple create-fixture methods and call the method (or methods) needed by each test at the begining of the test. If every test requires the same set of mutable fixture objects, one other approach you can take is make them simply vals and mix in trait OneInstancePerTest. If you mix in OneInstancePerTest, each test will be run in its own instance of the WordSpec, similar to the way JUnit tests are executed.

Although the create-fixture and OneInstancePerTest approaches take care of setting up a fixture before each test, they don't address the problem of cleaning up a fixture after the test completes. In this situation, one option is to mix in the BeforeAndAfterEach trait. BeforeAndAfterEach's beforeEach method will be run before, and its afterEach method after, each test (like JUnit's setUp and tearDown methods, respectively). For example, you could create a temporary file before each test, and delete it afterwords, like this:

import org.scalatest.WordSpec
import org.scalatest.BeforeAndAfterEach
import java.io.FileReader
import java.io.FileWriter
import java.io.File

class MySuite extends WordSpec with BeforeAndAfterEach {

private val FileName = "TempFile.txt" private var reader: FileReader = _

// Set up the temp file needed by the test override def beforeEach() { val writer = new FileWriter(FileName) try { writer.write("Hello, test!") } finally { writer.close() }

// Create the reader needed by the test reader = new FileReader(FileName) }

// Close and delete the temp file override def afterEach() { reader.close() val file = new File(FileName) file.delete() }

"A FileReader" must { "read in the contents of a file correctly" in { var builder = new StringBuilder var c = reader.read() while (c != -1) { builder.append(c.toChar) c = reader.read() } assert(builder.toString === "Hello, test!") }

"read in the first character of a file correctly" in { assert(reader.read() === 'H') }

"not be required" in { assert(1 + 1 === 2) } } }

In this example, the instance variable reader is a var, so it can be reinitialized between tests by the beforeEach method.

Although the BeforeAndAfterEach approach should be familiar to the users of most test other frameworks, ScalaTest provides another alternative that also allows you to perform cleanup after each test: overriding withFixture(NoArgTest). To execute each test, Suite's implementation of the runTest method wraps an invocation of the appropriate test method in a no-arg function. runTest passes that test function to the withFixture(NoArgTest) method, which is responsible for actually running the test by invoking the function. Suite's implementation of withFixture(NoArgTest) simply invokes the function, like this:

// Default implementation
protected def withFixture(test: NoArgTest) {
  test()
}

The withFixture(NoArgTest) method exists so that you can override it and set a fixture up before, and clean it up after, each test. Thus, the previous temp file example could also be implemented without mixing in BeforeAndAfterEach, like this:

import org.scalatest.WordSpec
import org.scalatest.BeforeAndAfterEach
import java.io.FileReader
import java.io.FileWriter
import java.io.File

class MySuite extends WordSpec {

private var reader: FileReader = _

override def withFixture(test: NoArgTest) {

val FileName = "TempFile.txt"

// Set up the temp file needed by the test val writer = new FileWriter(FileName) try { writer.write("Hello, test!") } finally { writer.close() }

// Create the reader needed by the test reader = new FileReader(FileName)

try { test() // Invoke the test function } finally { // Close and delete the temp file reader.close() val file = new File(FileName) file.delete() } }

"A FileReader" must { "read in the contents of a file correctly" in { var builder = new StringBuilder var c = reader.read() while (c != -1) { builder.append(c.toChar) c = reader.read() } assert(builder.toString === "Hello, test!") }

"read in the first character of a file correctly" in { assert(reader.read() === 'H') }

"not be required" in { assert(1 + 1 === 2) } } }

If you prefer to keep your test classes immutable, one final variation is to use the FixtureWordSpec trait from the org.scalatest.fixture package. Tests in an org.scalatest.fixture.FixtureWordSpec can have a fixture object passed in as a parameter. You must indicate the type of the fixture object by defining the Fixture type member and define a withFixture method that takes a one-arg test function. (A FixtureWordSpec has two overloaded withFixture methods, therefore, one that takes a OneArgTest and the other, inherited from Suite, that takes a NoArgTest.) Inside the withFixture(OneArgTest) method, you create the fixture, pass it into the test function, then perform any necessary cleanup after the test function returns. Instead of invoking each test directly, a FixtureWordSpec will pass a function that invokes the code of a test to withFixture(OneArgTest). Your withFixture(OneArgTest) method, therefore, is responsible for actually running the code of the test by invoking the test function. For example, you could pass the temp file reader fixture to each test that needs it by overriding the withFixture(OneArgTest) method of a FixtureWordSpec, like this:

import org.scalatest.fixture.FixtureWordSpec
import java.io.FileReader
import java.io.FileWriter
import java.io.File

class MySuite extends FixtureWordSpec {

type FixtureParam = FileReader

def withFixture(test: OneArgTest) {

val FileName = "TempFile.txt"

// Set up the temp file needed by the test val writer = new FileWriter(FileName) try { writer.write("Hello, test!") } finally { writer.close() }

// Create the reader needed by the test val reader = new FileReader(FileName)

try { // Run the test using the temp file test(reader) } finally { // Close and delete the temp file reader.close() val file = new File(FileName) file.delete() } }

"A FileReader" must { "read in the contents of a file correctly" in { reader => var builder = new StringBuilder var c = reader.read() while (c != -1) { builder.append(c.toChar) c = reader.read() } assert(builder.toString === "Hello, test!") }

"read in the first character of a file correctly" in { reader => assert(reader.read() === 'H') }

"not be required" in { () => assert(1 + 1 === 2) } } }

It is worth noting that the only difference in the test code between the mutable BeforeAndAfterEach approach shown here and the immutable FixtureWordSpec approach shown previously is that two of the FixtureWordSpec's test functions take a FileReader as a parameter via the "reader =>" at the beginning of the function. Otherwise the test code is identical. One benefit of the explicit parameter is that, as demonstrated by the "A FileReader must not be required" test, a FixtureWordSpec test need not take the fixture. So you can have some tests that take a fixture, and others that don't. In this case, the FixtureWordSpec provides documentation indicating which tests use the fixture and which don't, whereas the BeforeAndAfterEach approach does not. (If you have want to combine tests that take different fixture types in the same WordSpec, you can use MultipleFixtureWordSpec.)

If you want to execute code before and after all tests (and nested suites) in a suite, such as you could do with @BeforeClass and @AfterClass annotations in JUnit 4, you can use the beforeAll and afterAll methods of BeforeAndAfterAll. See the documentation for BeforeAndAfterAll for an example.

Shared tests

Sometimes you may want to run the same test code on different fixture objects. In other words, you may want to write tests that are "shared" by different fixture objects. To accomplish this in a WordSpec, you first place shared tests in behavior functions. These behavior functions will be invoked during the construction phase of any WordSpec that uses them, so that the tests they contain will be registered as tests in that WordSpec. For example, given this stack class:

import scala.collection.mutable.ListBuffer

class Stack[T] {

val MAX = 10 private var buf = new ListBuffer[T]

def push(o: T) { if (!full) o +: buf else throw new IllegalStateException("can't push onto a full stack") }

def pop(): T = { if (!empty) buf.remove(0) else throw new IllegalStateException("can't pop an empty stack") }

def peek: T = { if (!empty) buf(0) else throw new IllegalStateException("can't pop an empty stack") }

def full: Boolean = buf.size == MAX def empty: Boolean = buf.size == 0 def size = buf.size

override def toString = buf.mkString("Stack(", ", ", ")") }

You may want to test the Stack class in different states: empty, full, with one item, with one item less than capacity, etc. You may find you have several tests that make sense any time the stack is non-empty. Thus you'd ideally want to run those same tests for three stack fixture objects: a full stack, a stack with a one item, and a stack with one item less than capacity. With shared tests, you can factor these tests out into a behavior function, into which you pass the stack fixture to use when running the tests. So in your WordSpec for stack, you'd invoke the behavior function three times, passing in each of the three stack fixtures so that the shared tests are run for all three fixtures. You can define a behavior function that encapsulates these shared tests inside the WordSpec that uses them. If they are shared between different WordSpecs, however, you could also define them in a separate trait that is mixed into each WordSpec that uses them.

For example, here the nonEmptyStack behavior function (in this case, a behavior method) is defined in a trait along with another method containing shared tests for non-full stacks:

trait StackBehaviors { this: WordSpec =>

def nonEmptyStack(stack: Stack[Int], lastItemAdded: Int) {

"be non-empty" in { assert(!stack.empty) }

"return the top item on peek" in { assert(stack.peek === lastItemAdded) }

"not remove the top item on peek" in { val size = stack.size assert(stack.peek === lastItemAdded) assert(stack.size === size) }

"remove the top item on pop" in { val size = stack.size assert(stack.pop === lastItemAdded) assert(stack.size === size - 1) } }

def nonFullStack(stack: Stack[Int]) {

"not be full" in { assert(!stack.full) }

"add to the top on push" in { val size = stack.size stack.push(7) assert(stack.size === size + 1) assert(stack.peek === 7) } } }

Given these behavior functions, you could invoke them directly, but WordSpec offers a DSL for the purpose, which looks like this:

behave like nonEmptyStack(stackWithOneItem, lastValuePushed)
behave like nonFullStack(stackWithOneItem)

If you prefer to use an imperative style to change fixtures, for example by mixing in BeforeAndAfterEach and reassigning a stack var in beforeEach, you could write your behavior functions in the context of that var, which means you wouldn't need to pass in the stack fixture because it would be in scope already inside the behavior function. In that case, your code would look like this:

behave like nonEmptyStack // assuming lastValuePushed is also in scope inside nonEmptyStack
behave like nonFullStack

The recommended style, however, is the functional, pass-all-the-needed-values-in style. Here's an example:

class SharedTestExampleSpec extends WordSpec with StackBehaviors {

// Stack fixture creation methods def emptyStack = new Stack[Int]

def fullStack = { val stack = new Stack[Int] for (i <- 0 until stack.MAX) stack.push(i) stack }

def stackWithOneItem = { val stack = new Stack[Int] stack.push(9) stack }

def stackWithOneItemLessThanCapacity = { val stack = new Stack[Int] for (i <- 1 to 9) stack.push(i) stack }

val lastValuePushed = 9

"A Stack" when { "empty" should { "be empty" in { assert(emptyStack.empty) }

"complain on peek" in { intercept[IllegalStateException] { emptyStack.peek } }

"complain on pop" in { intercept[IllegalStateException] { emptyStack.pop } } }

"it contains one item" should { behave like nonEmptyStack(stackWithOneItem, lastValuePushed) behave like nonFullStack(stackWithOneItem) }

"it contains one item less than capacity" should { behave like nonEmptyStack(stackWithOneItemLessThanCapacity, lastValuePushed) behave like nonFullStack(stackWithOneItemLessThanCapacity) }

"full" should { "be full" in { assert(fullStack.full) }

behave like nonEmptyStack(fullStack, lastValuePushed)

"complain on a push" in { intercept[IllegalStateException] { fullStack.push(10) } } } } }

If you load these classes into the Scala interpreter (with scalatest's JAR file on the class path), and execute it, you'll see:

scala> (new SharedTestExampleSpec).execute()
A Stack (when empty)
- should be empty
- should complain on peek
- should complain on pop
A Stack (when it contains one item)
- should be non-empty
- should return the top item on peek
- should not remove the top item on peek
- should remove the top item on pop
- should not be full
- should add to the top on push
A Stack (when it contains one item less than capacity)
- should be non-empty
- should return the top item on peek
- should not remove the top item on peek
- should remove the top item on pop
- should not be full
- should add to the top on push
A Stack (when full)
- should be full
- should be non-empty
- should return the top item on peek
- should not remove the top item on peek
- should remove the top item on pop
- should complain on a push

One thing to keep in mind when using shared tests is that in ScalaTest, each test in a suite must have a unique name. If you register the same tests repeatedly in the same suite, one problem you may encounter is an exception at runtime complaining that multiple tests are being registered with the same test name. A good way to solve this problem in a FlatSpec is to make sure each invocation of a behavior function is in the context of a different behavior of clause, which will prepend a string to each test name. For example, the following code in a FlatSpec would register a test with the name "A Stack (when empty) should be empty":

  behavior of "A Stack (when empty)"

it should "be empty" in { assert(emptyStack.empty) } // ...

Or, using the shorthand notation:

  "A Stack (when empty)" should "be empty" in {
    assert(emptyStack.empty)
  }
  // ...

If the "should be empty" test was factored out into a behavior function, it could be called repeatedly so long as each invocation of the behavior function is in the context of a different behavior of clause.

Tagging tests

A WordSpec's tests may be classified into groups by tagging them with string names. As with any suite, when executing a WordSpec, groups of tests can optionally be included and/or excluded. To tag a WordSpec's tests, you pass objects that extend abstract class org.scalatest.Tag to taggedAs method invoked on the string that describes the test you want to tag. Class Tag takes one parameter, a string name. If you have created Java annotation interfaces for use as group names in direct subclasses of org.scalatest.Suite, then you will probably want to use group names on your WordSpecs that match. To do so, simply pass the fully qualified names of the Java interfaces to the Tag constructor. For example, if you've defined Java annotation interfaces with fully qualified names, com.mycompany.groups.SlowTest and com.mycompany.groups.DbTest, then you could create matching groups for Specs like this:

import org.scalatest.Tag

object SlowTest extends Tag("com.mycompany.groups.SlowTest") object DbTest extends Tag("com.mycompany.groups.DbTest")

Given these definitions, you could place WordSpec tests into groups like this:

import org.scalatest.WordSpec

class MySuite extends WordSpec {

"The Scala language" should {

"add correctly" taggedAs(SlowTest) in { val sum = 1 + 1 assert(sum === 2) assert(sum + 2 === 4) }

"subtract correctly" taggedAs(SlowTest, DbTest) in { val diff = 4 - 1 assert(diff === 3) assert(diff - 2 === 1) } } }

This code marks both tests with the com.mycompany.groups.SlowTest tag, and test "The Scala language should subtract correctly" with the com.mycompany.groups.DbTest tag.

The primary run method takes a Filter, whose constructor takes an optional Set[String]s called tagsToInclude and a Set[String] called tagsToExclude. If tagsToInclude is None, all tests will be run except those those belonging to tags listed in the tagsToExclude Set. If tagsToInclude is defined, only tests belonging to tags mentioned in the tagsToInclude set, and not mentioned in tagsToExclude, will be run.

Ignored tests

To support the common use case of “temporarily” disabling a test, with the good intention of resurrecting the test at a later time, WordSpec adds a method ignore to strings that can be used instead of in to register a test. For example, to temporarily disable the test with the name "A Stack should pop values in last-in-first-out order", just change “in” into “ignore,” like this:

import org.scalatest.WordSpec
import scala.collection.mutable.Stack

class StackSpec extends WordSpec {

"A Stack" should {

"pop values in last-in-first-out order" ignore { val stack = new Stack[Int] stack.push(1) stack.push(2) assert(stack.pop() === 2) assert(stack.pop() === 1) }

"throw NoSuchElementException if an empty stack is popped" in { val emptyStack = new Stack[String] intercept[NoSuchElementException] { emptyStack.pop() } } } }

If you run this version of StackSpec with:

scala> (new StackSpec).execute()

It will run only the second test and report that the first test was ignored:

A Stack
- should pop values in last-in-first-out order !!! IGNORED !!!
- should throw NoSuchElementException if an empty stack is popped

Informers

One of the parameters to the primary run method is a Reporter, which will collect and report information about the running suite of tests. Information about suites and tests that were run, whether tests succeeded or failed, and tests that were ignored will be passed to the Reporter as the suite runs. Most often the reporting done by default by WordSpec's methods will be sufficient, but occasionally you may wish to provide custom information to the Reporter from a test. For this purpose, an Informer that will forward information to the current Reporter is provided via the info parameterless method. You can pass the extra information to the Informer via its apply method. The Informer will then pass the information to the Reporter via an InfoProvided event. Here's an example:

import org.scalatest.WordSpec

class ArithmeticSpec extends WordSpec {

"The Scala language" should { "add correctly" in { val sum = 2 + 3 assert(sum === 5) info("addition seems to work") }

"subtract correctly" in { val diff = 7 - 2 assert(diff === 5) } } }

If you run this WordSpec from the interpreter, you will see the following message included in the printed report:

scala> (new ArithmeticSpec).execute()
The Scala language
- should add correctly
  + addition seems to work
- should subtract correctly

One use case for the Informer is to pass more information about a specification to the reporter. For example, the GivenWhenThen trait provides methods that use the implicit info provided by WordSpec to pass such information to the reporter. Here's an example:

import org.scalatest.WordSpec
import org.scalatest.GivenWhenThen

class ArithmeticSpec extends WordSpec with GivenWhenThen {

"The Scala language" should {

"add correctly" in {

given("two integers") val x = 2 val y = 3

when("they are added") val sum = x + y

then("the result is the sum of the two numbers") assert(sum === 5) }

"subtract correctly" in {

given("two integers") val x = 7 val y = 2

when("one is subtracted from the other") val diff = x - y

then("the result is the difference of the two numbers") assert(diff === 5) } } }

If you run this WordSpec from the interpreter, you will see the following messages included in the printed report:

scala> (new ArithmeticSpec).execute()
The Scala language
- should add correctly
  + Given two integers
  + When they are added
  + Then the result is the sum of the two numbers
- should subtract correctly
  + Given two integers
  + When one is subtracted from the other
  + Then the result is the difference of the two numbers

Pending tests

A pending test is one that has been given a name but is not yet implemented. The purpose of pending tests is to facilitate a style of testing in which documentation of behavior is sketched out before tests are written to verify that behavior (and often, the before the behavior of the system being tested is itself implemented). Such sketches form a kind of specification of what tests and functionality to implement later.

To support this style of testing, a test can be given a name that specifies one bit of behavior required by the system being tested. The test can also include some code that sends more information about the behavior to the reporter when the tests run. At the end of the test, it can call method pending, which will cause it to complete abruptly with TestPendingException. Because tests in ScalaTest can be designated as pending with TestPendingException, both the test name and any information sent to the reporter when running the test can appear in the report of a test run. (In other words, the code of a pending test is executed just like any other test.) However, because the test completes abruptly with TestPendingException, the test will be reported as pending, to indicate the actual test, and possibly the functionality it is intended to test, has not yet been implemented. You can mark tests as pending in a WordSpec like this:

import org.scalatest.WordSpec

class ArithmeticSpec extends WordSpec {

// Sharing fixture objects via instance variables val shared = 5

"The Scala language" should { "add correctly" in { val sum = 2 + 3 assert(sum === shared) }

"subtract correctly" is (pending) } }

If you run this version of ArithmeticSpec with:

scala> (new ArithmeticSpec).execute()

It will run both tests but report that The Scala language should subtract correctly is pending. You'll see:

The Scala language
- should add correctly
- should subtract correctly (pending)

One difference between an ignored test and a pending one is that an ignored test is intended to be used during a significant refactorings of the code under test, when tests break and you don't want to spend the time to fix all of them immediately. You can mark some of those broken tests as ignored temporarily, so that you can focus the red bar on just failing tests you actually want to fix immediately. Later you can go back and fix the ignored tests. In other words, by ignoring some failing tests temporarily, you can more easily notice failed tests that you actually want to fix. By contrast, a pending test is intended to be used before a test and/or the code under test is written. Pending indicates you've decided to write a test for a bit of behavior, but either you haven't written the test yet, or have only written part of it, or perhaps you've written the test but don't want to implement the behavior it tests until after you've implemented a different bit of behavior you realized you need first. Thus ignored tests are designed to facilitate refactoring of existing code whereas pending tests are designed to facilitate the creation of new code.

One other difference between ignored and pending tests is that ignored tests are implemented as a test tag that is excluded by default. Thus an ignored test is never executed. By contrast, a pending test is implemented as a test that throws TestPendingException (which is what calling the pending method does). Thus the body of pending tests are executed up until they throw TestPendingException. The reason for this difference is that it enables your unfinished test to send InfoProvided messages to the reporter before it completes abruptly with TestPendingException, as shown in the previous example on Informers that used the GivenWhenThen trait. For example, the following snippet in a WordSpec:

 "The Scala language" should {
    "add correctly" in {
      given("two integers")
      when("they are added")
      then("the result is the sum of the two numbers")
      pending
    }
    // ...

Would yield the following output when run in the interpreter:

The Scala language
- should add correctly (pending)
  + Given two integers
  + When they are added
  + Then the result is the sum of the two numbers

linear super types: CanVerb, MustVerb, ShouldVerb, Suite, AbstractSuite, Assertions, AnyRef, Any
self type: WordSpec
Ordering
  1. Alphabetic
  2. By inheritance
Inherited
  1. Hide All
  2. Show all
  1. WordSpec
  2. CanVerb
  3. MustVerb
  4. ShouldVerb
  5. Suite
  6. AbstractSuite
  7. Assertions
  8. AnyRef
  9. Any
Visibility
  1. Public
  2. All
Impl.
  1. Concrete
  2. Abstract

Type Members

  1. class AfterWord extends AnyRef

    Class whose instances are after words, which can be used to reduce text duplication.

  2. class Equalizer extends AnyRef

    Class used via an implicit conversion to enable any two objects to be compared with === in assertions in tests.

  3. trait NoArgTest extends () ⇒ Unit

    A test function taking no arguments, which also provides a test name and config map.

  4. class ResultOfTaggedAsInvocationOnString extends AnyRef

    Class that supports the registration of tagged tests.

  5. class StringCanWrapperForVerb extends AnyRef

    This class supports the syntax of FlatSpec, WordSpec, FixtureFlatSpec, and FixtureWordSpec.

  6. class StringMustWrapperForVerb extends AnyRef

    This class supports the syntax of FlatSpec, WordSpec, FixtureFlatSpec, and FixtureWordSpec.

  7. class StringShouldWrapperForVerb extends AnyRef

    This class supports the syntax of FlatSpec, WordSpec, FixtureFlatSpec, and FixtureWordSpec.

  8. class WordSpecStringWrapper extends AnyRef

    A class that via an implicit conversion (named convertToWordSpecStringWrapper) enables methods when, that, in, is, taggedAs and ignore to be invoked on Strings.

Value Members

  1. def != ( arg0 : AnyRef ) : Boolean

    attributes: final
    definition classes: AnyRef
  2. def != ( arg0 : Any ) : Boolean

    o != arg0 is the same as !(o == (arg0)).

    o != arg0 is the same as !(o == (arg0)).

    arg0

    the object to compare against this object for dis-equality.

    returns

    false if the receiver object is equivalent to the argument; true otherwise.

    attributes: final
    definition classes: Any
  3. def ## () : Int

    attributes: final
    definition classes: AnyRef → Any
  4. def $asInstanceOf [T0] () : T0

    attributes: final
    definition classes: AnyRef
  5. def $isInstanceOf [T0] () : Boolean

    attributes: final
    definition classes: AnyRef
  6. def == ( arg0 : AnyRef ) : Boolean

    o == arg0 is the same as if (o eq null) arg0 eq null else o.equals(arg0).

    o == arg0 is the same as if (o eq null) arg0 eq null else o.equals(arg0).

    arg0

    the object to compare against this object for equality.

    returns

    true if the receiver object is equivalent to the argument; false otherwise.

    attributes: final
    definition classes: AnyRef
  7. def == ( arg0 : Any ) : Boolean

    o == arg0 is the same as o.equals(arg0).

    o == arg0 is the same as o.equals(arg0).

    arg0

    the object to compare against this object for equality.

    returns

    true if the receiver object is equivalent to the argument; false otherwise.

    attributes: final
    definition classes: Any
  8. def afterWord ( text : String ) : AfterWord

    Creates an after word that an be used to reduce text duplication.

    Creates an after word that an be used to reduce text duplication.

    If you are repeating a word or phrase at the beginning of each string inside a block, you can "move the word or phrase" out of the block with an after word. You create an after word by passing the repeated word or phrase to the afterWord method. Once created, you can place the after word after when, a verb (should, must, or can), or that. (You can't place one after in or is, the words that introduce a test.) Here's an example that has after words used in all three places:

    import org.scalatest.WordSpec

    class ScalaTestGUISpec extends WordSpec {

    def theUser = afterWord("the user") def display = afterWord("display") def is = afterWord("is")

    "The ScalaTest GUI" when theUser { "clicks on an event report in the list box" should display { "a blue background in the clicked-on row in the list box" in {} "the details for the event in the details area" in {} "a rerun button" that is { "enabled if the clicked-on event is rerunnable" in {} "disabled if the clicked-on event is not rerunnable" in {} } } } }

    Running the previous WordSpec in the Scala interpreter would yield:

    scala> (new ScalaTestGUISpec).execute()
    The ScalaTest GUI (when the user clicks on an event report in the list box)
    - should display a blue background in the clicked-on row in the list box
    - should display the details for the event in the details area
    - should display a rerun button that is enabled if the clicked-on event is rerunnable
    - should display a rerun button that is disabled if the clicked-on event is not rerunnable
    

    attributes: protected
  9. def asInstanceOf [T0] : T0

    This method is used to cast the receiver object to be of type T0.

    This method is used to cast the receiver object to be of type T0.

    Note that the success of a cast at runtime is modulo Scala's erasure semantics. Therefore the expression 1.asInstanceOf[String] will throw a ClassCastException at runtime, while the expression List(1).asInstanceOf[List[String]] will not. In the latter example, because the type argument is erased as part of compilation it is not possible to check whether the contents of the list are of the requested typed.

    returns

    the receiver object.

    attributes: final
    definition classes: Any
  10. def assert ( o : Option[String] ) : Unit

    Assert that an Option[String] is None.

    Assert that an Option[String] is None. If the condition is None, this method returns normally. Else, it throws TestFailedException with the String value of the Some included in the TestFailedException's detail message.

    This form of assert is usually called in conjunction with an implicit conversion to Equalizer, using a === comparison, as in:

    assert(a === b)
    

    For more information on how this mechanism works, see the documentation for Equalizer.

    o

    the Option[String] to assert

    definition classes: Assertions
  11. def assert ( o : Option[String] , clue : Any ) : Unit

    Assert that an Option[String] is None.

    Assert that an Option[String] is None. If the condition is None, this method returns normally. Else, it throws TestFailedException with the String value of the Some, as well as the String obtained by invoking toString on the specified message, included in the TestFailedException's detail message.

    This form of assert is usually called in conjunction with an implicit conversion to Equalizer, using a === comparison, as in:

    assert(a === b, "extra info reported if assertion fails")
    

    For more information on how this mechanism works, see the documentation for Equalizer.

    o

    the Option[String] to assert

    clue

    An objects whose toString method returns a message to include in a failure report.

    definition classes: Assertions
  12. def assert ( condition : Boolean , clue : Any ) : Unit

    Assert that a boolean condition, described in String message, is true.

    Assert that a boolean condition, described in String message, is true. If the condition is true, this method returns normally. Else, it throws TestFailedException with the String obtained by invoking toString on the specified message as the exception's detail message.

    condition

    the boolean condition to assert

    clue

    An objects whose toString method returns a message to include in a failure report.

    definition classes: Assertions
  13. def assert ( condition : Boolean ) : Unit

    Assert that a boolean condition is true.

    Assert that a boolean condition is true. If the condition is true, this method returns normally. Else, it throws TestFailedException.

    condition

    the boolean condition to assert

    definition classes: Assertions
  14. val behave : BehaveWord

    Supports shared test registration in WordSpecs.

    Supports shared test registration in WordSpecs.

    This field enables syntax such as the following:

    behave like nonFullStack(stackWithOneItem)
    ^
    

    For more information and examples of the use of <cod>behave</code>, see the Shared tests section in the main documentation for this trait.

    attributes: protected
  15. def clone () : AnyRef

    This method creates and returns a copy of the receiver object.

    This method creates and returns a copy of the receiver object.

    The default implementation of the clone method is platform dependent.

    returns

    a copy of the receiver object.

    attributes: protected[lang]
    definition classes: AnyRef
    annotations: @throws()
  16. implicit def convertToEqualizer ( left : Any ) : Equalizer

    Implicit conversion from Any to Equalizer, used to enable assertions with === comparisons.

    Implicit conversion from Any to Equalizer, used to enable assertions with === comparisons.

    For more information on this mechanism, see the documentation for </code>Equalizer</code>.

    Because trait Suite mixes in Assertions, this implicit conversion will always be available by default in ScalaTest Suites. This is the only implicit conversion that is in scope by default in every ScalaTest Suite. Other implicit conversions offered by ScalaTest, such as those that support the matchers DSL or invokePrivate, must be explicitly invited into your test code, either by mixing in a trait or importing the members of its companion object. The reason ScalaTest requires you to invite in implicit conversions (with the exception of the implicit conversion for === operator) is because if one of ScalaTest's implicit conversions clashes with an implicit conversion used in the code you are trying to test, your program won't compile. Thus there is a chance that if you are ever trying to use a library or test some code that also offers an implicit conversion involving a === operator, you could run into the problem of a compiler error due to an ambiguous implicit conversion. If that happens, you can turn off the implicit conversion offered by this convertToEqualizer method simply by overriding the method in your Suite subclass, but not marking it as implicit:

    // In your Suite subclass
    override def convertToEqualizer(left: Any) = new Equalizer(left)
    

    left

    the object whose type to convert to Equalizer.

    attributes: implicit
    definition classes: Assertions
  17. implicit def convertToStringCanWrapper ( o : String ) : StringCanWrapperForVerb

    Implicitly converts an object of type String to a StringCanWrapper, to enable can methods to be invokable on that object.

    Implicitly converts an object of type String to a StringCanWrapper, to enable can methods to be invokable on that object.

    attributes: implicit
    definition classes: CanVerb
  18. implicit def convertToStringMustWrapper ( o : String ) : StringMustWrapperForVerb

    Implicitly converts an object of type String to a StringMustWrapper, to enable must methods to be invokable on that object.

    Implicitly converts an object of type String to a StringMustWrapper, to enable must methods to be invokable on that object.

    attributes: implicit
    definition classes: MustVerb
  19. implicit def convertToStringShouldWrapper ( o : String ) : StringShouldWrapperForVerb

    Implicitly converts an object of type String to a StringShouldWrapperForVerb, to enable should methods to be invokable on that object.

    Implicitly converts an object of type String to a StringShouldWrapperForVerb, to enable should methods to be invokable on that object.

    attributes: implicit
    definition classes: ShouldVerb
  20. implicit def convertToWordSpecStringWrapper ( s : String ) : WordSpecStringWrapper

    Implicitly converts Strings to WordSpecStringWrapper, which enables methods when, that, in, is, taggedAs and ignore to be invoked on Strings.

    Implicitly converts Strings to WordSpecStringWrapper, which enables methods when, that, in, is, taggedAs and ignore to be invoked on Strings.

    attributes: protected implicit
  21. def eq ( arg0 : AnyRef ) : Boolean

    This method is used to test whether the argument (arg0) is a reference to the receiver object (this).

    This method is used to test whether the argument (arg0) is a reference to the receiver object (this).

    The eq method implements an [http://en.wikipedia.org/wiki/Equivalence_relation equivalence relation] on non-null instances of AnyRef: * It is reflexive: for any non-null instance x of type AnyRef, x.eq(x) returns true. * It is symmetric: for any non-null instances x and y of type AnyRef, x.eq(y) returns true if and only if y.eq(x) returns true. * It is transitive: for any non-null instances x, y, and z of type AnyRef if x.eq(y) returns true and y.eq(z) returns true, then x.eq(z) returns true.

    Additionally, the eq method has three other properties. * It is consistent: for any non-null instances x and y of type AnyRef, multiple invocations of x.eq(y) consistently returns true or consistently returns false. * For any non-null instance x of type AnyRef, x.eq(null) and null.eq(x) returns false. * null.eq(null) returns true.

    When overriding the equals or hashCode methods, it is important to ensure that their behavior is consistent with reference equality. Therefore, if two objects are references to each other (o1 eq o2), they should be equal to each other (o1 == o2) and they should hash to the same value (o1.hashCode == o2.hashCode).

    arg0

    the object to compare against this object for reference equality.

    returns

    true if the argument is a reference to the receiver object; false otherwise.

    attributes: final
    definition classes: AnyRef
  22. def equals ( arg0 : Any ) : Boolean

    This method is used to compare the receiver object (this) with the argument object (arg0) for equivalence.

    This method is used to compare the receiver object (this) with the argument object (arg0) for equivalence.

    The default implementations of this method is an [http://en.wikipedia.org/wiki/Equivalence_relation equivalence relation]: * It is reflexive: for any instance x of type Any, x.equals(x) should return true. * It is symmetric: for any instances x and y of type Any, x.equals(y) should return true if and only if y.equals(x) returns true. * It is transitive: for any instances x, y, and z of type AnyRef if x.equals(y) returns true and y.equals(z) returns true, then x.equals(z) should return true.

    If you override this method, you should verify that your implementation remains an equivalence relation. Additionally, when overriding this method it is often necessary to override hashCode to ensure that objects that are "equal" (o1.equals(o2) returns true) hash to the same scala.Int (o1.hashCode.equals(o2.hashCode)).

    arg0

    the object to compare against this object for equality.

    returns

    true if the receiver object is equivalent to the argument; false otherwise.

    definition classes: AnyRef → Any
  23. def execute ( testName : String , configMap : Map[String, Any] ) : Unit

    Executes the test specified as testName in this Suite with the specified configMap, printing results to the standard output.

    Executes the test specified as testName in this Suite with the specified configMap, printing results to the standard output.

    This method implementation calls run on this Suite, passing in:

    • testName - Some(testName)
    • reporter - a reporter that prints to the standard output
    • stopper - a Stopper whose apply method always returns false
    • filter - a Filter constructed with None for tagsToInclude and Set() for tagsToExclude
    • configMap - the specified configMap Map[String, Any]
    • distributor - None
    • tracker - a new Tracker

    This method serves as a convenient way to execute a single test, passing in some objects via the configMap, especially from within the Scala interpreter.

    Note: In ScalaTest, the terms "execute" and "run" basically mean the same thing and can be used interchangably. The reason this convenience method and its three overloaded forms aren't named run is described the documentation of the overloaded form that takes no parameters: execute().

    testName

    the name of one test to run.

    configMap

    a Map of key-value pairs that can be used by the executing Suite of tests.

    attributes: final
    definition classes: Suite
  24. def execute ( testName : String ) : Unit

    Executes the test specified as testName in this Suite, printing results to the standard output.

    Executes the test specified as testName in this Suite, printing results to the standard output.

    This method implementation calls run on this Suite, passing in:

    • testName - Some(testName)
    • reporter - a reporter that prints to the standard output
    • stopper - a Stopper whose apply method always returns false
    • filter - a Filter constructed with None for tagsToInclude and Set() for tagsToExclude
    • configMap - an empty Map[String, Any]
    • distributor - None
    • tracker - a new Tracker

    This method serves as a convenient way to run a single test, especially from within the Scala interpreter.

    Note: In ScalaTest, the terms "execute" and "run" basically mean the same thing and can be used interchangably. The reason this convenience method and its three overloaded forms aren't named run is described the documentation of the overloaded form that takes no parameters: execute().

    testName

    the name of one test to run.

    attributes: final
    definition classes: Suite
  25. def execute ( configMap : Map[String, Any] ) : Unit

    Executes this Suite with the specified configMap, printing results to the standard output.

    Executes this Suite with the specified configMap, printing results to the standard output.

    This method implementation calls run on this Suite, passing in:

    • testName - None
    • reporter - a reporter that prints to the standard output
    • stopper - a Stopper whose apply method always returns false
    • filter - a Filter constructed with None for tagsToInclude and Set() for tagsToExclude
    • configMap - the specified configMap Map[String, Any]
    • distributor - None
    • tracker - a new Tracker

    This method serves as a convenient way to execute a Suite, passing in some objects via the configMap, especially from within the Scala interpreter.

    Note: In ScalaTest, the terms "execute" and "run" basically mean the same thing and can be used interchangably. The reason this convenience method and its three overloaded forms aren't named run is described the documentation of the overloaded form that takes no parameters: execute().

    configMap

    a Map of key-value pairs that can be used by the executing Suite of tests.

    attributes: final
    definition classes: Suite
  26. def execute () : Unit

    Executes this Suite, printing results to the standard output.

    Executes this Suite, printing results to the standard output.

    This method implementation calls run on this Suite, passing in:

    • testName - None
    • reporter - a reporter that prints to the standard output
    • stopper - a Stopper whose apply method always returns false
    • filter - a Filter constructed with None for tagsToInclude and Set() for tagsToExclude
    • configMap - an empty Map[String, Any]
    • distributor - None
    • tracker - a new Tracker

    This method serves as a convenient way to execute a Suite, especially from within the Scala interpreter.

    Note: In ScalaTest, the terms "execute" and "run" basically mean the same thing and can be used interchangably. The reason this convenience method and its three overloaded forms aren't named run is because junit.framework.TestCase declares a run method that takes no arguments but returns a junit.framework.TestResult. That run method would not overload with this method if it were named run, because it would have the same parameters but a different return type than the one defined in TestCase. To facilitate integration with JUnit 3, therefore, these convenience "run" methods are named execute. In particular, this allows trait org.scalatest.junit.JUnit3Suite to extend both org.scalatest.Suite and junit.framework.TestCase, which enables the creating of classes that can be run with either ScalaTest or JUnit 3.

    attributes: final
    definition classes: Suite
  27. def expect ( expected : Any )( actual : Any ) : Unit

    Expect that the value passed as expected equals the value passed as actual.

    Expect that the value passed as expected equals the value passed as actual. If the actual value equals the expected value (as determined by ==), expect returns normally. Else, expect throws an TestFailedException whose detail message includes the expected and actual values.

    expected

    the expected value

    actual

    the actual value, which should equal the passed expected value

    definition classes: Assertions
  28. def expect ( expected : Any , clue : Any )( actual : Any ) : Unit

    Expect that the value passed as expected equals the value passed as actual.

    Expect that the value passed as expected equals the value passed as actual. If the actual equals the expected (as determined by ==), expect returns normally. Else, if actual is not equal to expected, expect throws an TestFailedException whose detail message includes the expected and actual values, as well as the String obtained by invoking toString on the passed message.

    expected

    the expected value

    clue

    An object whose toString method returns a message to include in a failure report.

    actual

    the actual value, which should equal the passed expected value

    definition classes: Assertions
  29. def expectedTestCount ( filter : Filter ) : Int

    The total number of tests that are expected to run when this Suite's run method is invoked.

    The total number of tests that are expected to run when this Suite's run method is invoked.

    This trait's implementation of this method returns the sum of:

    • the size of the testNames List, minus the number of tests marked as ignored
    • the sum of the values obtained by invoking expectedTestCount on every nested Suite contained in nestedSuites
    filter

    a Filter with which to filter tests to count based on their tags

    definition classes: SuiteAbstractSuite
  30. def fail ( cause : Throwable ) : Nothing

    Throws TestFailedException, with the passed Throwable cause, to indicate a test failed.

    Throws TestFailedException, with the passed Throwable cause, to indicate a test failed. The getMessage method of the thrown TestFailedException will return cause.toString().

    cause

    a Throwable that indicates the cause of the failure.

    definition classes: Assertions
  31. def fail ( message : String , cause : Throwable ) : Nothing

    Throws TestFailedException, with the passed String message as the exception's detail message and Throwable cause, to indicate a test failed.

    Throws TestFailedException, with the passed String message as the exception's detail message and Throwable cause, to indicate a test failed.

    message

    A message describing the failure.

    cause

    A Throwable that indicates the cause of the failure.

    definition classes: Assertions
  32. def fail ( message : String ) : Nothing

    Throws TestFailedException, with the passed String message as the exception's detail message, to indicate a test failed.

    Throws TestFailedException, with the passed String message as the exception's detail message, to indicate a test failed.

    message

    A message describing the failure.

    definition classes: Assertions
  33. def fail () : Nothing

    Throws TestFailedException to indicate a test failed.

    Throws TestFailedException to indicate a test failed.

    definition classes: Assertions
  34. def finalize () : Unit

    This method is called by the garbage collector on the receiver object when garbage collection determines that there are no more references to the object.

    This method is called by the garbage collector on the receiver object when garbage collection determines that there are no more references to the object.

    The details of when and if the finalize method are invoked, as well as the interaction between finalize and non-local returns and exceptions, are all platform dependent.

    attributes: protected[lang]
    definition classes: AnyRef
    annotations: @throws()
  35. def getClass () : java.lang.Class[_]

    Returns a representation that corresponds to the dynamic class of the receiver object.

    Returns a representation that corresponds to the dynamic class of the receiver object.

    The nature of the representation is platform dependent.

    returns

    a representation that corresponds to the dynamic class of the receiver object.

    attributes: final
    definition classes: AnyRef
  36. def hashCode () : Int

    Returns a hash code value for the object.

    Returns a hash code value for the object.

    The default hashing algorithm is platform dependent.

    Note that it is allowed for two objects to have identical hash codes (o1.hashCode.equals(o2.hashCode)) yet not be equal (o1.equals(o2) returns false). A degenerate implementation could always return 0. However, it is required that if two objects are equal (o1.equals(o2) returns true) that they have identical hash codes (o1.hashCode.equals(o2.hashCode)). Therefore, when overriding this method, be sure to verify that the behavior is consistent with the equals method.

    returns

    the hash code value for the object.

    definition classes: AnyRef → Any
  37. implicit def info : Informer

    Returns an Informer that during test execution will forward strings (and other objects) passed to its apply method to the current reporter.

    Returns an Informer that during test execution will forward strings (and other objects) passed to its apply method to the current reporter. If invoked in a constructor, it will register the passed string for forwarding later during test execution. If invoked while this WordSpec is being executed, such as from inside a test function, it will forward the information to the current reporter immediately. If invoked at any other time, it will throw an exception. This method can be called safely by any thread.

    attributes: protected implicit
  38. def intercept [T <: AnyRef] ( f : ⇒ Any )(implicit manifest : Manifest[T] ) : T

    Intercept and return an exception that's expected to be thrown by the passed function value.

    Intercept and return an exception that's expected to be thrown by the passed function value. The thrown exception must be an instance of the type specified by the type parameter of this method. This method invokes the passed function. If the function throws an exception that's an instance of the specified type, this method returns that exception. Else, whether the passed function returns normally or completes abruptly with a different exception, this method throws TestFailedException.

    Note that the type specified as this method's type parameter may represent any subtype of AnyRef, not just Throwable or one of its subclasses. In Scala, exceptions can be caught based on traits they implement, so it may at times make sense to specify a trait that the intercepted exception's class must mix in. If a class instance is passed for a type that could not possibly be used to catch an exception (such as String, for example), this method will complete abruptly with a TestFailedException.

    f

    the function value that should throw the expected exception

    manifest

    an implicit Manifest representing the type of the specified type parameter.

    returns

    the intercepted exception, if it is of the expected type

    definition classes: Assertions
  39. def isInstanceOf [T0] : Boolean

    This method is used to test whether the dynamic type of the receiver object is T0.

    This method is used to test whether the dynamic type of the receiver object is T0.

    Note that the test result of the test is modulo Scala's erasure semantics. Therefore the expression 1.isInstanceOf[String] will return false, while the expression List(1).isInstanceOf[List[String]] will return true. In the latter example, because the type argument is erased as part of compilation it is not possible to check whether the contents of the list are of the requested typed.

    returns

    true if the receiver object is an instance of erasure of type T0; false otherwise.

    attributes: final
    definition classes: Any
  40. def ne ( arg0 : AnyRef ) : Boolean

    o.ne(arg0) is the same as !(o.eq(arg0)).

    o.ne(arg0) is the same as !(o.eq(arg0)).

    arg0

    the object to compare against this object for reference dis-equality.

    returns

    false if the argument is not a reference to the receiver object; true otherwise.

    attributes: final
    definition classes: AnyRef
  41. def nestedSuites : List[Suite]

    A List of this Suite object's nested Suites.

    A List of this Suite object's nested Suites. If this Suite contains no nested Suites, this method returns an empty List. This trait's implementation of this method returns an empty List.

    definition classes: SuiteAbstractSuite
  42. def notify () : Unit

    Wakes up a single thread that is waiting on the receiver object's monitor.

    Wakes up a single thread that is waiting on the receiver object's monitor.

    attributes: final
    definition classes: AnyRef
  43. def notifyAll () : Unit

    Wakes up all threads that are waiting on the receiver object's monitor.

    Wakes up all threads that are waiting on the receiver object's monitor.

    attributes: final
    definition classes: AnyRef
  44. def pending : PendingNothing

    Throws TestPendingException to indicate a test is pending.

    Throws TestPendingException to indicate a test is pending.

    A pending test is one that has been given a name but is not yet implemented. The purpose of pending tests is to facilitate a style of testing in which documentation of behavior is sketched out before tests are written to verify that behavior (and often, the before the behavior of the system being tested is itself implemented). Such sketches form a kind of specification of what tests and functionality to implement later.

    To support this style of testing, a test can be given a name that specifies one bit of behavior required by the system being tested. The test can also include some code that sends more information about the behavior to the reporter when the tests run. At the end of the test, it can call method pending, which will cause it to complete abruptly with TestPendingException. Because tests in ScalaTest can be designated as pending with TestPendingException, both the test name and any information sent to the reporter when running the test can appear in the report of a test run. (In other words, the code of a pending test is executed just like any other test.) However, because the test completes abruptly with TestPendingException, the test will be reported as pending, to indicate the actual test, and possibly the functionality it is intended to test, has not yet been implemented.

    Note: This method always completes abruptly with a TestPendingException. Thus it always has a side effect. Methods with side effects are usually invoked with parentheses, as in pending(). This method is defined as a parameterless method, in flagrant contradiction to recommended Scala style, because it forms a kind of DSL for pending tests. It enables tests in suites such as FunSuite or Spec to be denoted by placing "(pending)" after the test name, as in:

    test("that style rules are not laws") (pending)
    

    Readers of the code see "pending" in parentheses, which looks like a little note attached to the test name to indicate it is pending. Whereas "(pending()) looks more like a method call, "(pending)" lets readers stay at a higher level, forgetting how it is implemented and just focusing on the intent of the programmer who wrote the code.

    definition classes: Suite
  45. def pendingUntilFixed ( f : ⇒ Unit ) : Unit

    Execute the passed block of code, and if it completes abruptly, throw TestPendingException, else throw TestFailedException.

    Execute the passed block of code, and if it completes abruptly, throw TestPendingException, else throw TestFailedException.

    This method can be used to temporarily change a failing test into a pending test in such a way that it will automatically turn back into a failing test once the problem originally causing the test to fail has been fixed. At that point, you need only remove the pendingUntilFixed call. In other words, a pendingUntilFixed surrounding a block of code that isn't broken is treated as a test failure. The motivation for this behavior is to encourage people to remove pendingUntilFixed calls when there are no longer needed.

    This method facilitates a style of testing in which tests are written before the code they test. Sometimes you may encounter a test failure that requires more functionality than you want to tackle without writing more tests. In this case you can mark the bit of test code causing the failure with pendingUntilFixed. You can then write more tests and functionality that eventually will get your production code to a point where the original test won't fail anymore. At this point the code block marked with pendingUntilFixed will no longer throw an exception (because the problem has been fixed). This will in turn cause pendingUntilFixed to throw TestFailedException with a detail message explaining you need to go back and remove the pendingUntilFixed call as the problem orginally causing your test code to fail has been fixed.

    f

    a block of code, which if it completes abruptly, should trigger a TestPendingException

    definition classes: Suite
  46. def run ( testName : Option[String] , reporter : Reporter , stopper : Stopper , filter : Filter , configMap : Map[String, Any] , distributor : Option[Distributor] , tracker : Tracker ) : Unit

    Runs this suite of tests.

    Runs this suite of tests.

    If testName is None, this trait's implementation of this method calls these two methods on this object in this order:

    • runNestedSuites(report, stopper, tagsToInclude, tagsToExclude, configMap, distributor)
    • runTests(testName, report, stopper, tagsToInclude, tagsToExclude, configMap)

    If testName is defined, then this trait's implementation of this method calls runTests, but does not call runNestedSuites. This behavior is part of the contract of this method. Subclasses that override run must take care not to call runNestedSuites if testName is defined. (The OneInstancePerTest trait depends on this behavior, for example.)

    Subclasses and subtraits that override this run method can implement them without invoking either the runTests or runNestedSuites methods, which are invoked by this trait's implementation of this method. It is recommended, but not required, that subclasses and subtraits that override run in a way that does not invoke runNestedSuites also override runNestedSuites and make it final. Similarly it is recommended, but not required, that subclasses and subtraits that override run in a way that does not invoke runTests also override runTests (and runTest, which this trait's implementation of runTests calls) and make it final. The implementation of these final methods can either invoke the superclass implementation of the method, or throw an UnsupportedOperationException if appropriate. The reason for this recommendation is that ScalaTest includes several traits that override these methods to allow behavior to be mixed into a Suite. For example, trait BeforeAndAfterEach overrides runTestss. In a Suite subclass that no longer invokes runTests from run, the BeforeAndAfterEach trait is not applicable. Mixing it in would have no effect. By making runTests final in such a Suite subtrait, you make the attempt to mix BeforeAndAfterEach into a subclass of your subtrait a compiler error. (It would fail to compile with a complaint that BeforeAndAfterEach is trying to override runTests, which is a final method in your trait.)

    testName

    an optional name of one test to run. If None, all relevant tests should be run. I.e., None acts like a wildcard that means run all relevant tests in this Suite.

    reporter

    the Reporter to which results will be reported

    stopper

    the Stopper that will be consulted to determine whether to stop execution early.

    filter

    a Filter with which to filter tests based on their tags

    configMap

    a Map of key-value pairs that can be used by the executing Suite of tests.

    distributor

    an optional Distributor, into which to put nested Suites to be run by another entity, such as concurrently by a pool of threads. If None, nested Suites will be run sequentially.

    tracker

    a Tracker tracking Ordinals being fired by the current thread.

    definition classes: WordSpecSuiteAbstractSuite
  47. def runNestedSuites ( reporter : Reporter , stopper : Stopper , filter : Filter , configMap : Map[String, Any] , distributor : Option[Distributor] , tracker : Tracker ) : Unit

    Run zero to many of this Suite's nested Suites.

    Run zero to many of this Suite's nested Suites.

    If the passed distributor is None, this trait's implementation of this method invokes run on each nested Suite in the List obtained by invoking nestedSuites. If a nested Suite's run method completes abruptly with an exception, this trait's implementation of this method reports that the Suite aborted and attempts to run the next nested Suite. If the passed distributor is defined, this trait's implementation puts each nested Suite into the Distributor contained in the Some, in the order in which the Suites appear in the List returned by nestedSuites, passing in a new Tracker obtained by invoking nextTracker on the Tracker passed to this method.

    Implementations of this method are responsible for ensuring SuiteStarting events are fired to the Reporter before executing any nested Suite, and either SuiteCompleted or SuiteAborted after executing any nested Suite.

    reporter

    the Reporter to which results will be reported

    stopper

    the Stopper that will be consulted to determine whether to stop execution early.

    filter

    a Filter with which to filter tests based on their tags

    configMap

    a Map of key-value pairs that can be used by the executing Suite of tests.

    distributor

    an optional Distributor, into which to put nested Suites to be run by another entity, such as concurrently by a pool of threads. If None, nested Suites will be run sequentially.

    tracker

    a Tracker tracking Ordinals being fired by the current thread.

    attributes: protected
    definition classes: SuiteAbstractSuite
  48. def runTest ( testName : String , reporter : Reporter , stopper : Stopper , configMap : Map[String, Any] , tracker : Tracker ) : Unit

    Run a test.

    Run a test. This trait's implementation runs the test registered with the name specified by testName. Each test's name is a concatenation of the text of all describers surrounding a test, from outside in, and the test's spec text, with one space placed between each item. (See the documenation for testNames for an example.)

    testName

    the name of one test to execute.

    reporter

    the Reporter to which results will be reported

    stopper

    the Stopper that will be consulted to determine whether to stop execution early.

    configMap

    a Map of properties that can be used by this Spec's executing tests.

    tracker

    a Tracker tracking Ordinals being fired by the current thread.

    attributes: protected
    definition classes: WordSpecSuiteAbstractSuite
  49. def runTests ( testName : Option[String] , reporter : Reporter , stopper : Stopper , filter : Filter , configMap : Map[String, Any] , distributor : Option[Distributor] , tracker : Tracker ) : Unit

    Run zero to many of this WordSpec's tests.

    Run zero to many of this WordSpec's tests.

    This method takes a testName parameter that optionally specifies a test to invoke. If testName is Some, this trait's implementation of this method invokes runTest on this object, passing in:

    • testName - the String value of the testName Option passed to this method
    • reporter - the Reporter passed to this method, or one that wraps and delegates to it
    • stopper - the Stopper passed to this method, or one that wraps and delegates to it
    • configMap - the configMap passed to this method, or one that wraps and delegates to it

    This method takes a Set of tag names that should be included (tagsToInclude), and a Set that should be excluded (tagsToExclude), when deciding which of this Suite's tests to execute. If tagsToInclude is empty, all tests will be executed except those those belonging to tags listed in the tagsToExclude Set. If tagsToInclude is non-empty, only tests belonging to tags mentioned in tagsToInclude, and not mentioned in tagsToExclude will be executed. However, if testName is Some, tagsToInclude and tagsToExclude are essentially ignored. Only if testName is None will tagsToInclude and tagsToExclude be consulted to determine which of the tests named in the testNames Set should be run. For more information on trait tags, see the main documentation for this trait.

    If testName is None, this trait's implementation of this method invokes testNames on this Suite to get a Set of names of tests to potentially execute. (A testNames value of None essentially acts as a wildcard that means all tests in this Suite that are selected by tagsToInclude and tagsToExclude should be executed.) For each test in the testName Set, in the order they appear in the iterator obtained by invoking the elements method on the Set, this trait's implementation of this method checks whether the test should be run based on the tagsToInclude and tagsToExclude Sets. If so, this implementation invokes runTest, passing in:

    • testName - the String name of the test to run (which will be one of the names in the testNames Set)
    • reporter - the Reporter passed to this method, or one that wraps and delegates to it
    • stopper - the Stopper passed to this method, or one that wraps and delegates to it
    • configMap - the configMap passed to this method, or one that wraps and delegates to it
    testName

    an optional name of one test to run. If None, all relevant tests should be run. I.e., None acts like a wildcard that means run all relevant tests in this Suite.

    reporter

    the Reporter to which results will be reported

    stopper

    the Stopper that will be consulted to determine whether to stop execution early.

    filter

    a Filter with which to filter tests based on their tags

    configMap

    a Map of key-value pairs that can be used by the executing Suite of tests.

    distributor

    an optional Distributor, into which to put nested Suites to be run by another entity, such as concurrently by a pool of threads. If None, nested Suites will be run sequentially.

    tracker

    a Tracker tracking Ordinals being fired by the current thread.

    attributes: protected
    definition classes: WordSpecSuiteAbstractSuite
  50. implicit val subjectRegistrationFunction : StringVerbBlockRegistration

    Supports the registration of subjects.

    Supports the registration of subjects.

    For example, this method enables syntax such as the following:

    "A Stack" should { ...
              ^
    

    This function is passed as an implicit parameter to a should method provided in ShouldVerb, a must method provided in MustVerb, and a can method provided in CanVerb. When invoked, this function registers the subject and executes the block.

    attributes: protected implicit
  51. implicit val subjectWithAfterWordRegistrationFunction : (String, String, ResultOfAfterWordApplication) ⇒ Unit

    Supports the registration of subject descriptions with after words.

    Supports the registration of subject descriptions with after words.

    For example, this method enables syntax such as the following:

    def provide = afterWord("provide")

    "The ScalaTest Matchers DSL" can provide { ... } ^

    This function is passed as an implicit parameter to a should method provided in ShouldVerb, a must method provided in MustVerb, and a can method provided in CanVerb. When invoked, this function registers the subject and executes the block.

    attributes: protected implicit
  52. def suiteName : String

    A user-friendly suite name for this Suite.

    A user-friendly suite name for this Suite.

    This trait's implementation of this method returns the simple name of this object's class. This trait's implementation of runNestedSuites calls this method to obtain a name for Reports to pass to the suiteStarting, suiteCompleted, and suiteAborted methods of the Reporter.

    returns

    this Suite object's suite name.

    definition classes: Suite
  53. def synchronized [T0] ( arg0 : ⇒ T0 ) : T0

    attributes: final
    definition classes: AnyRef
  54. def tags : Map[String, Set[String]]

    A Map whose keys are String tag names to which tests in this Spec belong, and values the Set of test names that belong to each tag.

    A Map whose keys are String tag names to which tests in this Spec belong, and values the Set of test names that belong to each tag. If this WordSpec contains no tags, this method returns an empty Map.

    This trait's implementation returns tags that were passed as strings contained in Tag objects passed to methods test and ignore.

    definition classes: WordSpecSuiteAbstractSuite
  55. def testNames : Set[String]

    An immutable Set of test names.

    An immutable Set of test names. If this WordSpec contains no tests, this method returns an empty Set.

    This trait's implementation of this method will return a set that contains the names of all registered tests. The set's iterator will return those names in the order in which the tests were registered. Each test's name is composed of the concatenation of the text of each surrounding describer, in order from outside in, and the text of the example itself, with all components separated by a space. For example, consider this WordSpec:

    import org.scalatest.WordSpec

    class StackSpec { "A Stack" when { "not empty" must { "allow me to pop" in {} } "not full" must { "allow me to push" in {} } } }

    Invoking testNames on this Spec will yield a set that contains the following two test name strings:

    "A Stack (when not empty) must allow me to pop"
    "A Stack (when not full) must allow me to push"
    

    definition classes: WordSpecSuiteAbstractSuite
  56. def toString () : String

    Returns a string representation of the object.

    Returns a string representation of the object.

    The default representation is platform dependent.

    returns

    a string representation of the object.

    definition classes: AnyRef → Any
  57. def wait () : Unit

    attributes: final
    definition classes: AnyRef
    annotations: @throws()
  58. def wait ( arg0 : Long , arg1 : Int ) : Unit

    attributes: final
    definition classes: AnyRef
    annotations: @throws()
  59. def wait ( arg0 : Long ) : Unit

    attributes: final
    definition classes: AnyRef
    annotations: @throws()
  60. def withClue ( clue : Any )( fun : ⇒ Unit ) : Unit

    Executes the block of code passed as the second parameter, and, if it completes abruptly with a ModifiableMessage exception, prepends the "clue" string passed as the first parameter to the beginning of the detail message of that thrown exception, then rethrows it.

    Executes the block of code passed as the second parameter, and, if it completes abruptly with a ModifiableMessage exception, prepends the "clue" string passed as the first parameter to the beginning of the detail message of that thrown exception, then rethrows it. If clue does not end in a white space character, one space will be added between it and the existing detail message (unless the detail message is not defined).

    This method allows you to add more information about what went wrong that will be reported when a test fails. Here's an example:

    withClue("(Employee's name was: " + employee.name + ")") {
      intercept[IllegalArgumentException] {
        employee.getTask(-1)
      }
    }
    

    If an invocation of intercept completed abruptly with an exception, the resulting message would be something like:

    (Employee's name was Bob Jones) Expected IllegalArgumentException to be thrown, but no exception was thrown
    

    definition classes: Assertions
  61. def withFixture ( test : NoArgTest ) : Unit

    Run the passed test function in the context of a fixture established by this method.

    Run the passed test function in the context of a fixture established by this method.

    This method should set up the fixture needed by the tests of the current suite, invoke the test function, and if needed, perform any clean up needed after the test completes. Because the NoArgTest function passed to this method takes no parameters, preparing the fixture will require side effects, such as reassigning instance vars in this Suite or initializing a globally accessible external database. If you want to avoid reassigning instance vars you can use FixtureSuite.

    This trait's implementation of runTest invokes this method for each test, passing in a NoArgTest whose apply method will execute the code of the test.

    This trait's implementation of this method simply invokes the passed NoArgTest function.

    test

    the no-arg test function to run with a fixture

    attributes: protected
    definition classes: SuiteAbstractSuite

Inherited from CanVerb

Inherited from MustVerb

Inherited from ShouldVerb

Inherited from Suite

Inherited from AbstractSuite

Inherited from Assertions

Inherited from AnyRef

Inherited from Any